Light Sensitive Centrifuge Tubes

Phone Number

+91 9108788989

Email

contact@biostarlifetech.com

Enquire Now

Light Sensitive Centrifuge Tubes

Specification:15 mL 50 mL
Cap Type: Plug seal
Bottom Type: Conical
Packaging: Re-sealable Bag Paper Rack

Product Information

The 15 mL and 50 mL light sensitive centrifuge tubes are made of polypropylene (PP) conforming to USP Class VI standards and can block 100% of UV rays. They are designed for light-proof storage or centrifugation of light-sensitive samples.

Light Sensitive Centrifuge Tubes Features

Features

The brown tube body can block ultraviolet rays, making it suitable for handling photosensitive samples

Easy-to-read black graduations and the accuracy is within ±2%

Contains a large, white frosted writing area, resistant to alcohol wiping

Features

Maximum RCF: 12,500 ×g

Working temperature range: -80℃~121C

Leak Proof

Available in sterilized and non-sterilized, sterilized by irradiation, SAL 10-6

DNase/RNase free, non-pyrogenic and non-cytotoxic

Material

Tube Body

Polypropylene (PP)

Tube Cap

High-density polyethylene (HDPE)

Conforming to USP Class VI Standards

Order Information

Light Sensitive Centrifuge Tubes

Cat. No.	Capacity (mL)	Bottom	Sterile	Maximum RCF (×g)	Package	Qty. Per Bag	Qty. Per Case
CFT710150	15	Conical	N	12,500	Re-sealable Bag	50	500
CFT711150	15	Conical	Y	12,500	Re-sealable Bag	25	500
CFT712150	15	Conical	Y	12,500	Paper Rack	25	500
CFT710500	50	Conical	N	12,500	Re-sealable Bag	50	500
CFT711500	50	Conical	Y	12,500	Re-sealable Bag	25	500
CFT712500	50	Conical	Y	12,500	Paper Rack	25	500

Frequently Asked Questions

What is the maximum rotational speed that the centrifuge tubes of Jet Biofil can withstand?

21000xg. Due to the different center distance of the rotor shaft of different centrifuges, the centrifugal force generated at the same speed (rpm) is also different, so we usually use the relative centrifugal force (RCF) (g) to represent the tolerance degree of the centrifuge tube in the process of rotating centrifugation.

Can the centrifuge tubes of Jet Biofil hold some kind of solution? How about its chemical compatibility?

It is necessary to pay attention to whether the sample is compatible with the material of the centrifuge tube as is used, especially if the sample is some chemical reagents or organic solvents, and the Chemical Compatibility Table of PP Plastic Materials can be used as reference. Samples with low or incompatible centrifugal compatibility are not recommended, and customers can also do pre-experiments to have a test.

What is the possible reason for the burst of the centrifuge tubes in the process of centrifuge?

When centrifuging, it is necessary to pay attention to the chosen centrifugal force cannot exceed the maximum centrifugal force that the product itself can withstand.

Please notice that the maximum centrifugal force (RCF) that can be withstood may be decreased when the sample is centrifuged at low temperature or the sample is an organic solvent/volatile irritant

What should be pay attention to when using the centrifuge tubes to preserve the samples at a low temperature?

When the sample is preserved below 0 ℃, the applicability of the centrifuge tube is closely related to the composition of the solution and preservation conditions. The centrifuge tube cannot be placed on the foam support, nor the bottom of the tube is in contact with the thermal insulation materials. And please use a hollow support when preserving the samples at low temperature. Otherwise, as part of the centrifuge tube is protected by thermal insulation material, while the other part is not, the temperature difference of the overall tube body makes the tube prone to burst. In addition, please reserve a space of at least 10% of the total volume to avoid sample spillage or tube burst caused by volume expansion due to liquid solidification.

Why the centrifuge tube smell special when its package is opened?

If you smell some odor in the product you receive, it is not because of the abnormal quality of the product. This is because some molecules will be vaporized and retained in the product/packaging in the process of high temperature injection molding/irradiation sterilization of the raw material plastic particles of centrifuge tube products.

The materials used for making the centrifuge tubes of Jet Biofil comply to the USP Class VI standards (USP Class VI Chapter, "Biological reactivity Tests, in Vitro" and Chapter, "Biological Reactivity Tests, in vivo”). No cytolysis or cytotoxic effects were observed through the verification. And the outgoing products in the process of quality inspection have passed various verification tests and are in line with the product release standards.