Lid Lock Micro Centrifuge Tubes

Phone Number

+91 9108788989

Email

contact@biostarlifetech.com

Enquire Now

Lid Lock Micro Centrifuge Tubes

Specification: 0.5 mL 1.5 mL 2.0 mL 5.0 mL
Packaging: Bag

Product Information

Made of transparent polymer, polypropylene (PP), the centrifuge tubes are designed with a lid lock to provide better sealability for sample protection, and to avoid accidental opening of the cap and evaporation of samples during long-term storage, ensuring safe operations.

Lid Lock Micro Centrifuge Tubes Features

Features

Multiple volume and color specifications available,easy for recording and identification

Conical bottom, smooth and transparent tube with a clear scale to facilitate volume reading

The tube is designed with a frosted area to record experimental data

DNase/RNase-free, non-pyrogenic

Features

Lid lock prevents accidental opening of cap and evaporation of samples during long-term storage, and ensures safe operations

Maximum RCF of up to 25,000 ×g

Temperature range: -80°C–121°C (does not deform after high-temperature sterilization and remains highly transparent)

Sterilized by irradiation, SAL 10-6

Material

Polypropylene (PP)

Conforming to USP Class VI Standards

Order Information

Micro Centrifuge Tubes with Lid Lock

Cat. No.	Capacity (mL)	Color	Sterile	Qty. Per Box	Qty. Per Case
CFT010005	0.5	Natural	N	1000	8000
CFT010015	1.5	Natural	N	500	4000
CFT020015	1.5	Brown	N	500	4000
CFT010020	2	Natural	N	500	4000
CFT011005	0.5	Natural	Y	1000	8000
CFT011015	1.5	Natural	Y	500	4000
CFT021015	1.5	Brown	Y	500	4000
CFT011020	2	Natural	Y	500	4000

Black Micro Centrifuge Tubes with Lid Lock

Cat. No.	Capacity (mL)	Color	Sterile	Qty. Per Box	Qty. Per Case
CFT030005	0.5	Black	N	1000	8000
CFT030015	1.5	Black	N	500	4000
CFT030020	2	Black	N	500	4000
CFT031005	0.5	Black	Y	1000	8000
CFT031015	1.5	Black	Y	500	4000
CFT031020	2	Black	Y	500	4000

Micro Centrifuge Tubes with Lid Lock, Non-sterile, 5 mL

Cat. No.	Capacity (mL)	Color	Sterile	Qty. Per Box	Qty. Per Case
CFT122050	5	Natural	N	200	4000
CFT123050	5	Blue	N	200	4000
CFT124050	5	Yellow	N	200	4000
CFT125050	5	Green	N	200	4000
CFT126050	5	Rose Red	N	200	4000
CFT127050	5	Black	N	200	4000
CFT110050	5	Yellow	N	250	2500
CFT112050	5	Black	N	250	2500

Frequently Asked Questions

What is the maximum rotational speed that the centrifuge tubes of Jet Biofil can withstand?

21000xg. Due to the different center distance of the rotor shaft of different centrifuges, the centrifugal force generated at the same speed (rpm) is also different, so we usually use the relative centrifugal force (RCF) (g) to represent the tolerance degree of the centrifuge tube in the process of rotating centrifugation.

Can the centrifuge tubes of Jet Biofil hold some kind of solution? How about its chemical compatibility?

It is necessary to pay attention to whether the sample is compatible with the material of the centrifuge tube as is used, especially if the sample is some chemical reagents or organic solvents, and the Chemical Compatibility Table of PP Plastic Materials can be used as reference. Samples with low or incompatible centrifugal compatibility are not recommended, and customers can also do pre-experiments to have a test.

What is the possible reason for the burst of the centrifuge tubes in the process of centrifuge?

When centrifuging, it is necessary to pay attention to the chosen centrifugal force cannot exceed the maximum centrifugal force that the product itself can withstand.

Please notice that the maximum centrifugal force (RCF) that can be withstood may be decreased when the sample is centrifuged at low temperature or the sample is an organic solvent/volatile irritant

What should be pay attention to when using the centrifuge tubes to preserve the samples at a low temperature?

When the sample is preserved below 0 ℃, the applicability of the centrifuge tube is closely related to the composition of the solution and preservation conditions. The centrifuge tube cannot be placed on the foam support, nor the bottom of the tube is in contact with the thermal insulation materials. And please use a hollow support when preserving the samples at low temperature. Otherwise, as part of the centrifuge tube is protected by thermal insulation material, while the other part is not, the temperature difference of the overall tube body makes the tube prone to burst. In addition, please reserve a space of at least 10% of the total volume to avoid sample spillage or tube burst caused by volume expansion due to liquid solidification.

Why the centrifuge tube smell special when its package is opened?

If you smell some odor in the product you receive, it is not because of the abnormal quality of the product. This is because some molecules will be vaporized and retained in the product/packaging in the process of high temperature injection molding/irradiation sterilization of the raw material plastic particles of centrifuge tube products.

The materials used for making the centrifuge tubes of Jet Biofil comply to the USP Class VI standards (USP Class VI Chapter, "Biological reactivity Tests, in Vitro" and Chapter, "Biological Reactivity Tests, in vivo”). No cytolysis or cytotoxic effects were observed through the verification. And the outgoing products in the process of quality inspection have passed various verification tests and are in line with the product release standards.