Low Binding Micro centrifuge Tubes(Lo-ProteinTM Micro centrifuge Tubes/Lo-DNATM Micro centrifuge Tubes)

Phone Number

+91 9108788989

Email

contact@biostarlifetech.com

Enquire Now

Low Binding Micro centrifuge Tubes(Lo-ProteinTM Micro centrifuge Tubes/Lo-DNATM Micro centrifuge Tubes)

Capacity: 0.5 mL, 1.5 mL and 2.0 mL

Product Information

Gene therapy and vaccine production often involve various types of purification for proteins, DNA, and other substances. Since nonspecific binding to plastic containers will lead to the loss of valuable samples, the purification processes often depend on high-quality plastic products for sample processing and storage. The smaller the sample volume is, the more important it becomes to reduce the binding between the sample and the container used.

The low binding microcentrifuge tubes of JET BIOFIL is optimized for protein and DNA analytics. These tubes are made using a unique high-purity polypropylene polymer material that does not require any surface coating, such as siliconization. Strict quality control is implemented in accordance with ISO9001 and ISO13485. The stable quality ensuring significantly reduces binding between samples and plastic surface, minimizing sample loss and achieving a maximum recovery rate of your precious samples and more accurate analysis results.

Low Binding Micro centrifuge Tubes(Lo-ProteinTM Micro centrifuge Tubes/Lo-DNATM Micro centrifuge Tubes) Features

Features

Made of special high-purity polypropylene (PP) polymer can effectively reduce the nonspecific binding of protein/nucleic acid to the tube surface

No surface coating (e.g., silicification) on the tube wall can reduce sample binding and interference to samples

Lid lock prevents accidental opening of lid and evaporation of samples during long-term storage, and ensures operating safety

Smooth and transparent tube body with clear graduation, designed with a frosted writing area, makes it convenient for recording

Samples of different proteins and nucleic acids can be ensured to the maximum recovery, with a recovery rate over 90%

Features

The product has been tested for 18 items, including tightness, folding resistance of flipped lid, centrifugal force, solvent resistance, extractable and accelerated aging, which shows stable performance

The maximum centrifugal force for 1.5 mL, 2 mL is RCF 25,000×g; the maximum centrifugal force for 0.5 mL is RCF 30,000×g

Working temperatuer range: -80°C~121°C (no deformation after autoclaving with open lid)

Sterilized and non-sterilized available, sterilized by irradiation to SAL 10-6

DNase/RNase-free, Non-pyrogenic, human DNA-free, PCR inhibitor-free

Material

Polypropylene (PP)

Conforming to USP Class VI Standards

Order Information

Low Binding Micro centrifuge Tubes(Lo-ProteinTM Micro centrifuge Tubes/Lo-DNATM Micro centrifuge Tubes)

Cat. No.	Low Binding	Capacity (mL)	Maximum RCF (×g)	Sterile	Qty. Per Bag	Qty. Per Case
CFT800005	Protein	0.5	30,000	No	50	400
CFT060005	DNA	0.5	30,000	No	50	1200
CFT800015	Protein	1.5	25,000	No	50	400
CFT060015	DNA	1.5	25,000	No	50	1000
CFT800020	Protein	2	25,000	No	50	400
CFT060020	DNA	2	25,000	No	50	1000
CFT801005	Protein	0.5	30,000	Yes	50	400
CFT061005	DNA	0.5	30,000	Yes	50	1200
CFT801015	Protein	1.5	25,000	Yes	50	400
CFT061015	DNA	1.5	25,000	Yes	50	1000
CFT801020	Protein	2	25,000	Yes	50	400
CFT061020	DNA	2	25,000	Yes	50	1000

Frequently Asked Questions

What is the maximum rotational speed that the centrifuge tubes of Jet Biofil can withstand?

21000xg. Due to the different center distance of the rotor shaft of different centrifuges, the centrifugal force generated at the same speed (rpm) is also different, so we usually use the relative centrifugal force (RCF) (g) to represent the tolerance degree of the centrifuge tube in the process of rotating centrifugation.

Can the centrifuge tubes of Jet Biofil hold some kind of solution? How about its chemical compatibility?

It is necessary to pay attention to whether the sample is compatible with the material of the centrifuge tube as is used, especially if the sample is some chemical reagents or organic solvents, and the Chemical Compatibility Table of PP Plastic Materials can be used as reference. Samples with low or incompatible centrifugal compatibility are not recommended, and customers can also do pre-experiments to have a test.

What is the possible reason for the burst of the centrifuge tubes in the process of centrifuge?

When centrifuging, it is necessary to pay attention to the chosen centrifugal force cannot exceed the maximum centrifugal force that the product itself can withstand.

Please notice that the maximum centrifugal force (RCF) that can be withstood may be decreased when the sample is centrifuged at low temperature or the sample is an organic solvent/volatile irritant

What should be pay attention to when using the centrifuge tubes to preserve the samples at a low temperature?

When the sample is preserved below 0 ℃, the applicability of the centrifuge tube is closely related to the composition of the solution and preservation conditions. The centrifuge tube cannot be placed on the foam support, nor the bottom of the tube is in contact with the thermal insulation materials. And please use a hollow support when preserving the samples at low temperature. Otherwise, as part of the centrifuge tube is protected by thermal insulation material, while the other part is not, the temperature difference of the overall tube body makes the tube prone to burst. In addition, please reserve a space of at least 10% of the total volume to avoid sample spillage or tube burst caused by volume expansion due to liquid solidification.

Why the centrifuge tube smell special when its package is opened?

If you smell some odor in the product you receive, it is not because of the abnormal quality of the product. This is because some molecules will be vaporized and retained in the product/packaging in the process of high temperature injection molding/irradiation sterilization of the raw material plastic particles of centrifuge tube products.

The materials used for making the centrifuge tubes of Jet Biofil comply to the USP Class VI standards (USP Class VI Chapter, "Biological reactivity Tests, in Vitro" and Chapter, "Biological Reactivity Tests, in vivo”). No cytolysis or cytotoxic effects were observed through the verification. And the outgoing products in the process of quality inspection have passed various verification tests and are in line with the product release standards.

Phone Number

Email

+1 800-123-1234

+1 800-123-1234

+1 800-123-1234

Low Binding Micro centrifuge Tubes(Lo-ProteinTM Micro centrifuge Tubes/Lo-DNATM Micro centrifuge Tubes)

Low Binding Micro centrifuge Tubes(Lo-ProteinTM Micro centrifuge Tubes/Lo-DNATM Micro centrifuge Tubes)

Product Information

Low Binding Micro centrifuge Tubes(Lo-ProteinTM Micro centrifuge Tubes/Lo-DNATM Micro centrifuge Tubes) Features

Features

Features

Material

Polypropylene (PP)

Conforming to USP Class VI Standards

Low Binding Micro centrifuge Tubes(Lo-ProteinTM Micro centrifuge Tubes/Lo-DNATM Micro centrifuge Tubes)

Frequently Asked Questions

What is the maximum rotational speed that the centrifuge tubes of Jet Biofil can withstand?

Can the centrifuge tubes of Jet Biofil hold some kind of solution? How about its chemical compatibility?

What is the possible reason for the burst of the centrifuge tubes in the process of centrifuge?

What should be pay attention to when using the centrifuge tubes to preserve the samples at a low temperature?

Why the centrifuge tube smell special when its package is opened?