JET CellSLIP™ Cell slide is a material of in vitro cell experiment achieved by adherent cells growing adherent to a certain solid surface (e.g., cover glass, slide glass) according to requirements for experimental research. HE staining and immuno-cyto-chemistry of a large number of cell slides are often required in many research projects with massive samples and numerous indicators to be measured. However, routine cell slides used currently have serious defects. For instance, cell slides are prone to be damaged because they are made of glass; cell slides are difficult to control due to no handle; cells can grow in any part of the cell slide and their container when culturing, etc. JET cell slide and culture dish which is a patented product (patent number: ZL201520113833.9, ZL201420594580.7, ZL201420594259., ZL200610047607.0) solves various defects of existing cell slides and contributes to simple and easy operation of above experimental studies and application.
The cell slide is made from PET, has high strength and is unbreakable Only the surface of the cell slide undergoes high hydrophilic treatment, so cells are easy to grow adherent to the cell slide; while other parts receive hydrophobic treatment, thus cells are difficult to grow There are 2 specifications with different diameters: 8 and 10mm; the number of cell slides with single dish：12/18/32/45. Transparency and light transmittance of the cell slide are good; therefore, cells can be clearly observed under a light microscope and a fluorescence microscope The specific set structure of the cell slide can realize the development of multi-factor, multi-index and multi-level in vitro study under the same conditions, resulting in accurate and reliable research results Cell culture done once can prepare multiple cell slides for different studies and objectives, increasing work efficiency The handle of the cell slide tilts with a certain angle, which is convenient for operators to directly clamp. The handle is engraved with numbers, facilitating identification The product and forceps for the cell slide are both sterilized with gamma ray, and should be used immediately after opening DNase and RNase-free Non-pyrogenic
| Material | PET- high strength and is unbreakable |
| Surface | High hydrophilic treatment, so cells are easy to grow adherent to the cell slide |
| Light transmittance | Can be observed under a light microscope and a fluorescence microscope |
| Cell Growth Area (cm²) | 0.5 & 0.79 |
| Packing | Individually packed |
| Purity grade(s) | Sterile, pyrogen-, DNase-, RNase-, human and bacterial DNA-free. Non-cytotoxic | Sterilization |  - irradiation |
| Cat. No. | Dish | Description | Qty. per Box/Case | ||||
|---|---|---|---|---|---|---|---|
| Cell slide Qty. | Diameter (mm) | Approx. Cell Growth Area（cm2）Single |
Approx. Cell Growth Area（cm2）Total |
Plate | |||
| CXD206008 | 6cm | 18 | 8 | 0.50 | 9.00 | 48 | 1/48 |
| CXD206010 | 12 | 10 | 0.79 | 9.42 | 48 | ||
| CXD206008 | 6cm | 18 | 8 | 0.50 | 9.00 | 48 | 1/48 |
| CXD206010 | 12 | 10 | 0.79 | 9.42 | 48 | ||
JET CellSLIP™ Cell slide are manufactured in accordance with ISO13485:2003 & ISO9001:2008 quality management systems in class 100,000 clean room. Radiation protocols, Quality certificate and Certificate of Compliance are provided with every shipment upon request
| Component Material | PET- high strength and is unbreakable |
| Sterilization Assurance Level | SAL 10 ‾6. Every lot has been irradiated and dosimetrically released. Procedures for determining the dosage comply with ISO11137 |
| Non-Pyrogenic | Products are validated to have less than 0.5EU/ml |
| Cytotoxicity | All material resins are qualified using USP and /or ISO 10993 standards for cytotoxicity and have been shown to be non-toxic |
| DNase & RNase Free | Products are labeled DNase & RNase free and have been validated |
| Quality Control Testing | Representative samples have been selected from each lot and inspected according to ZK-QI |
Each box of products is matched with individually packed sterile metal tweezers and individually packaged in peel-to-open plastic blister pack. Every case is printed with lot No. for quality traceability as well as expiry date. We warrant that the packaging is sufficient to protect the products against any damage during transit and storage.
Cell and Tissue culture products series are all innovatively designed by JET Engineers and manufactured under the control of ISO 9001: 2008 and ISO 13485 quality management systems. All the JET Biofil product are manufactured with 100% USP VI crystal class virgin polystyrene ( GPPS) and equal high quality polyethylene ( PE) to eliminate all extraneous materials and ensure the integrity. Furthermore, the high transparency of high class material ensures good observability. In addition, all the products are sterilized by gamma irradiation, certified DNase RNase free and non- Pyrogenic. Products are modified with vacuum gas plasma causing the very hydrophobic polystyrene surface to become negatively charged and hydrophilic allowing cells to attach evenly and consistently.
BioStar offers a complete satisfaction guarantee so you can be confident of your purchasing decision. If, for any reason you are not satisfied with the product performance or service provided, we will either replace of issue a refund for the purchase price of your product.
